I've recently decided to give Norton DNS a try, but am worried I'm going to run into the same problem I did with Open DNS until I figured that out. WIth the Linksys e1200 there are 3 spots on the router config page to put DNS IP addresses and if you don't fill in all 3 then the last slot will use one of my ISP's DNS servers. So with Open DNS I used their IP's in the first two spots like it said and left the third blank (0.0.0.0). Come to find out my ISP (Comcast) filled in the third spot with one of its DNS server IP's and it would always revert to it instead of using the Open DNS IP's even though the Open DNS IP's were placed before it. So to counter this I found a third Open DNS IP address so all 3 spots would be filled with just Open DNS IP's and everything worked fine. Upon looking at the Norton DNS IP's there are only two (199.85.126.10/199.85.127.10) for least restrictive which is what I want to use. Should I just use an IP from the more restrictive option of Norton DNS to fill the third spot? How exactly would I test that I am in fact using Norton DNS IP's since the test page stil isn't working correctly? Hopefully I spelled this out in the least confusing way possible lol. Thanks!
↧